Designed to ensure precise temperature measurements in demanding environments.
Special Cable
Up to 1.1 kV
Varies by insulation type: PVC (70°C, 85°C), XLPE (90°C)
ANSI 96.1 and IS 8784
Thermocouple extension cables are designed to ensure precise temperature measurements, serving as critical extension leads from thermocouples to measuring stations. These cables are tailored for accuracy, reliability, and durability in demanding environments.
Solid/Stranded. Kx, Rx, Tx, Sx, Jx
PVC (70°C, 85°C), XLPE (90°C) for enhanced thermal resistance
Shielding includes aluminum tape with a drain wire for superior protection
PVC in FR, FRLS, and LSZH varieties
Galvanized Iron (GI) wires/strips
PVC in FR, FRLS, and LSZH varieties
Various sizes available
Everything you need to know about our thermocouple extension & compensating cables, alloy pairings, and temperature ratings.
Suyog manufactures thermocouple extension/compensating cables matched to standard thermocouple types confirm your required type (commonly J or K) when placing an order so the correct alloy pairing and color coding (per ANSI/IS 8784) is supplied.
Extension cable uses the same alloy as the thermocouple itself for maximum accuracy; compensating cable uses a lower-cost alloy that mimics the thermocouple's electrical output over a limited temperature range both maintain signal accuracy from the sensor to the measuring instrument.
Reversed polarity or mismatched types cause inaccurate temperature readings; standardized color coding (per ANSI 96.1/IS 8784) lets installers verify correct polarity and type at a glance.
Insulation temperature rating varies by material PVC (70°C/85°C) or XLPE (90°C) so choose insulation based on the ambient conditions the cable run passes through, not just the sensor's measuring range.
Yes, armoured versions are available for mechanical protection in industrial environments where cables are exposed to physical stress.